How To Do it Yourself

Tuesday, 5 April 2011

How to Recycle Plastic : tips that might help you and others

How to Recycle Plastic

it helps you save money .
it helps others to get plastic made products at low costs .
it helps saving environment from pollution .
it helps you it helps me and everyone .

Keep Recycling !

Searches related to how to recycle
how to recycle plastic bags
how to recycle computers
how to recycle cds
how to recycle glass
how to recycle paper
how to recycle plastic bottles
how to recycle batteries
how to recycle water

Tips: Top Ten Ways to Recycle

List of the top 10 ways to recycle at home and in the office.

Buy recycled paper and print on both sides. When using paper in the office, print on both sides of the sheet and recycle the paper when you are finished. By recycling one ton of paper, you can save 17 trees, almost 7,000 gallons of water and more than three cubic yards of landfill space.
Recycle your outdated technology. According to EPA, Americans throw out two million tons of e-waste each year. Avoid adding to that waste by recycling your old technology. For more information on electronic recycling,
Make recycling bins readily available. Make sure your home and office are outfitted with recycling bins for paper, plastic and metal. Keep them out in the open and label them appropriately. Sometimes the convenience factor is all that is needed.
Recycle your empty ink and toner cartridges. Almost eight cartridges are thrown out in the United States every second of every day. That's almost 700,000 cartridges per day.
Buy remanufactured ink and toner cartridges. Each remanufactured cartridge keeps approximately 2.5 pounds of metal and plastic out of landfills and saves about a half gallon of oil.
Recycle old newspapers laying around the office. When finished reading the newspaper, either leave it for someone else to read or recycle it.
Look for the recycled option in all the products you buy. It's not just paper that is recycled.
Buy rechargeable batteries. It takes 1,000 regular batteries to equal the lifespan of one rechargeable battery. When you are discarding your batteries, recycle them.
Purchase rewritable CDs and DVDs so that you can reuse them from project to project.
Reuse your morning coffee cup. Or better yet, buy a mug to avoid the waste caused by throwing away the paper or Styrofoam.

Article Source :

Visit this Site for more interesting reads about "PROTECTING THE ENVIRONMENT"

How to Plan Stress Free Vacation : Travel Tips

Learn how to plan the perfect stress free travel. All the information needed to prepare the entire family for a trip to remember.
The first step in planning any family vacation is deciding where and when you are going. It is best to decide at least six months prior to leaving.
Once you have decided where to go, the next step is how to get there. This really depends on how far from home you are going and how much time off from work you are taking.
If you are going a great distance and want more quality time at your vacation destination, you may consider flying. Although, if you enjoy the travel as much as the destination, driving is the best alternative. To drive takes only a couple of decisions more. You must route out you trip, estimate milage, and estimate gasoline expenses.
Now that you know where you are going and how you are getting there, start making all necessary reservations. If you reserve airline tickets, rental cars, and hotel/motel accomodations early, they are usually cheaper. Anything you can reserve early-Do it! It will save you hassels later. Once you have made reservations, keep all the information in a handy place.
Now you can decide how much money needs to be available for the trip and start a savings plan. Set aside a certain amount every month in preparation for the trip.
Also, decide who will take care of your pets or if they will go to a kennel to be boarded. Call your veterinarian to check on your pet's current vaccinations.
Ask a trustworthy neighbor or family member to collect your mail and newspapers or have them held while you are away. If you have houseplants that are easy to care for, you can leave them in a bathtub with an inch or two of standing water while you are away. If your plants are complicated, you may ask a neighbor or family member to plant sit.
About one or two weeks before the trip, begin reconfirming all reservations to ensure everything is in order. Now is the time to remind neighbors/family members about watering your plants or collecting your mail. If you choose to have mail and newspapers held, this would be the time to set that up.
Go to the bank and get traveler's cheques for the bulk of your spending money. Try to keep about $50.00 cash for on the road snacks and small souvenirs.
Get out your luggage to decide what you need for each family member. If traveling by car, remember to pack a bag of activities and snacks for younger trip takers. If you are traveling by plane, choose what you think will really occupy your children as the carry-on bag will have to be smaller.
Packing to make sure you don't forget anything is simple. Go into each room of your house and think about what you use on a daily basis from that room. This will ensure that you will not miss any common items such as a toothbrush.
Visualize a wardrobe for every family member taking into consideration the climate of your vacation destination. Even if you travel to a warm destination always bring at least one warm outfit and a light jacket in case the temperature drops unexpectedly.
The day before you leave, drop the pets off at their respective places for boarding. Make sure all the bags are packed and you have all necessary paperwork readily accessible. Before you leave, put plants in bathtub with one inch standing water and make sure all appliances are turned off.
Also checkout these Traveler's Accessories you might want to buy :

And there are many more items that you would like to have during your vacations Make a list of all the items , and try to keep your luggage as light as you can .

Happy Traveling !
Related articles :

Monday, 4 April 2011

How To Make Windows Home Server into a Domain Controller

"Download MP3 Audio" File of This Narration

Windows 7 Home Premum 64 Bit System Builder 1pk [Old Version]

Active Directory lets companies manage users, computers, printers, and more from a centralized location. Have you wanted this functionality at home but don’t have money for Windows Server? Here’s how you can promote Windows Home Server to a domain controller.

Maybe you don’t have 100+ computers in your closet but sometimes it may feel that way. Active Directory allows you to centrally manage the users that can log into the machines as well as help quickly set up machine preferences and can even help manage your virtual machines. If you have been wanting a better way to manage it all, or even just want to dive into Active Directory here’s how you can do it on the cheap.

Please be aware that Microsoft specifically says you are not allowed to do this according to their end user license agreement (EULA) that you have to agree to when installing or setting up a Windows Home Server. As such, this article will be strictly for educational purposes.

If you are allergic to breaking EULAs I suggest you purchase Windows Server from Microsoft. Select students on the other hand can freely download Windows Server from Microsoft DreamSpark.

Set Up Windows Home Server

After your initial setup of Windows Home Server you will need to turn on remote desktop abilities from the Windows Home Server console. If you are reading this article I am going to assume you know how to do that yourself.

You will also need a couple of dedicated disks or partitions for storing Active Directory information. Active directory uses the folders NTDS and SYSVOL to store its database and public files and if they are not on dedicated disks you most likely see slowdown with your server and with your network.

Active Directory requires that you have DNS and a static IP address on your server. You don’t have to do these two steps right now, but you will need to be prepared to do them during the process.

Promoting your WHS to a domain controller is going to do a few things that you may not want. Please read the below precautions before continuing.

You will no longer be able to add computers to WHS with the WHS connector. From now on you will have to join computers to your new domain that you will set up. In order to be able to add computers to a domain you cannot use any of the “home” variants of Windows and instead will need to use the business, professional, or enterprise tiers.
All of your users in WHS will be erased and only the default user accounts (e.g. administrator, guest, etc.) will be left in WHS.
Your WHS webpage will be broken. You can “fix” this by installing another web server (e.g. Apache) but it will take more setup and work.

All in all, be prepared to do a fresh install on your WHS and do not do this on a machine you are actively keeping information on. It would probably be a better idea to have a second computer to set up AD and migrate any information over that you want.

Always have backups, if this is a computer you use it is your responsibility to make a backup before you start this process.

Promote Your Server

Domain controller promotion is done through the dcpromo.exe command. Go remote with your server and then open the run dialog and run the command.

Click next a couple times and then select the option to create a new controller for a new domain.

Then select new domain forest.

Next it is best to select to set up DNS on the local machine. This is the easiest way to get the controller configured. You will just have to make sure you turn off DNS on your router.

If you are going to keep DHCP issued from your router you will also need to point DNS responsibilities to your server. Please check your router manual for how to do that.

Finally we can name the new domain. If you own a web domain name don’t name it the same thing as your domain name because in this case it may cause problems unless you are also running the web service and dynamic DNS updater from this computer.

Instead it is a better idea to come up with a .local name for your domain.

Next you will need to put in a NETBIOS name. You should be able to select the default and just click next.

We need to tell the domain controller where to store the database, log files, and public files. It is recommended to store all of this on a separate hard drive. In my installation I have a separate 20 Gb hard drive plugged in (E:) where I have put the required files.

If you have any pre-Windows 2000 computers I feel bad for you. In most cases you can leave out support for anything that old in the next step.

Select a new Administrator password.

And then review your changes and click next.

Your promotion will start the process for you.

You will probably be asked for your installation CD at some point so make sure you have your CD (or the files from your CD) available to you.

You will also probably be prompted to change your IP address from dynamic to static during the process.

Click OK and then continue to change your IP address to a suitable static address.

Your setup should finish with this screen. Once you click finish go ahead and restart your new domain controller.

Don’t worry if the reboot takes a while. It needs to start up a lot new services and will probably take a while for the first reboot.

Once the machine reboots you may get an error about a service failing to start. You should also have a new option at your login screen to log into the new domain you just created.

Post Installation Settings

Now that you have a domain and a domain controller there are just a couple of things we need to do to make sure things run smoothly.

First we can fix the services error we got before by going to start -> run -> “services.msc”

Find the “SSDP Discovery Service” and the “Universal Plug and Play Device Host” services and set them to start automatically. Then start the services manually.

Now browse to C:\Windows\Temp. Right click on the folders and choose properties.

On the security tab click add and then type network service and click check names. Once the name is verified (it will be underlined) click OK.

Repeat the above two steps for the c:\Windows\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files directory too.

Now we need to configure the Windows Firewall to allow for the correct programs to get through. You could just disable the firewall but you will take a performance hit by just disabling it. Here are the ports and programs you will need to allow access through your firewall.

To add a program exception click on the exceptions tab and then click add program. Browse to the dns.exe located in the c:\windows\system32 folder and then click change scope.

Change the scope to only be on your local subnet because you don’t want anyone outside of your network using your DNS for lookups.

Next do the same thing for the DHCP server located at C:\WINDOWS\system32\tcpsvcs.exe but don’t limit the scope. Instead allow any computer to connect to DHCP otherwise the computers will never get an IP address after we turn that on.

We won’t set up DHCP in this article but may revisit this in the future. If you want to know how to set up DHCP check out the we got served link at the end of this post.

Go back to the main exceptions tab and then click add port. Type in LDAP for the name and 389 for the port number. Change the scope to my network (subnet) only and then click OK.

Repeat these steps for the following additional ports.

LDAP – 389 – UDP

LDAP – 636 – TCP

LDAP – 3268 – TCP

Kerboros – 88 – TCP and UDP

You now have Active Directory all set up and the necessary ports required to join computers to your new domain and begin managing users, computers, printers, and much more from a central location.

Related articles :

Wednesday, 30 March 2011

Sewing Tips and Tricks . How to Sew

Threading Needles
Apply some hair spray on your finger and to the end of the thread, stiffening it enough to be easily threaded

Sharp Machine Needles

Sharpen sewing machine needles by stitching through sandpaper.

Heavy Seams

Rub seams with a bar of soap to allow a sewing machine needle to easily pass through.

Button Storage

Buttons can be stored in empty pill bottles with snap-on tops.

Needle Holder

An empty thermometer case is ideal for holding long and fine needles that may easily be lost in a sewing kit.

Recycled Zipper

Stray a used zipper with spray starch and it will stitch in like new.

Long-lasting Buttons

Coat the center of buttons with clear nail polish and they'll stay on longer.

Another Button Tip

n a four hole button, sew through two holes at a time, knotting the thread and tying off for each set of holes. If one set should break, the other will still hold

Sewing Accessories

Rummage sales and thrift shops are good for finding unusual bottoms and trims.

Emergency Thimble

When hand sewing and unable to find a needle, wrap a couple of Band Aids across the end of your finger.

Handy Thread

In your sewing basket keep 10 or 12 needles threaded with often-used colors for quick repair jobs.

Spool Storage

Use an egg carton to store spools of thread

Magnet Tip

Instead of groping around your floor for fallen needles and pins, keep a magnet in your sewing kit. Simply sweep it across your rug to pick up these strays.

Scrap Bag

Save small scraps of fabric in a paper bag near your sewing machine to use in stuffed toys and throw pillows.

Sewing Machine Pad

Rest your sewing machine on a foam rubber pad about 1 1/2 inches thick to absorb vibration and avoid sliding.

Stretched Sweaters

Stitch elastic thread along the inside of sweaters whose bottoms have been stretched out of shape.

Extra Notches

Add more notches to leather belts by heating a steel knitting needle until re-hot and poking through the leather.

Sewing Emblems on Clothing

Dab household glue on the back of the emblem and place in position on the garment. Let it set for a moment, then stitch around the edges. The glue will wash out.

Sliding Foot Pedal

Prevent sliding sewing machine foot pedals by gluing a piece of foam rubber to the bottom.

Stuck Zippers

If a zipper sticks, run a bar of soap over it and it will slide easily.

Sewing Machine Oil

Stitch through a blotter after oiling your sewing machine to prevent extra oil from damaging your garments.

Storing Patterns

Instead of trying to fit used patterns back into their envelops, store them in plastic bags

Rip-less Patterns

Keep patterns from tearing and wrinkle free by spraying with spray starch.

Hidden Hemline

Hide hemline marks with rows of zigzag stitching.

Mending Gloves

An old fashion clothespin can be inserted into the finger of a glove that needs repairing.

Baggy Knees

Apply an iron-patch to the underside of the knee portion of children' pants to keep the knees from bagging and wearing out.

Pajama Feet

Reinforce the feet of children's pajamas by applying iron-on patches to them.

Ribbon Trim

Use grosgrain ribbon to bind worn coat sleeves and pocket edges.

Men's Suits

Ask for scraps when a new suit is being tailored. Use them later for mending or for taking along to stores to match shirts, ties, etc.

Shirt Stays

Cotton swabs are ideal for using as shirt collar stays. The padded ends will not poke through material.

Recycled Elastic

Remove elastic waistband from used pantyhose for use in other sewing projects.

Jacket Cuffs

Used old knee socks to make new cuffs for children's jackets.

Outgrown Arms

Sew a pair of woolen wristlets to the outgrown arms of children's snowsuits.

Outgrown Pajamas

Sew ruffles or other trim to the out grown legs of children's pajamas.

Baby Washcloths

Double thickness of old T-shirts make great washcloths for babies.

Outgrown Snowsuits

A toddler's play jacket can be made easily if the shoulders of an outgrown one-piece snowsuit still fit. Cut off at the crotch and hem.

Eyeglasses Case

An Attractive case for glasses can be made by folding a pretty potholder in half and stitching across the bottom and up one side.

Blue Jean Blanket

Save good portion of worn out blue jeans and stitch irregular patches together to make a sturdy beach blanket.

Discarded Purses

Remove all zippers from worn-out purse before throwing it away to use in making dresses.

Ski Pants

Blue jeans can be converted into ski pants by spraying with a waterproof fabric protector

Covered Buttons

Cover a button in wool or flannel before covering with silk or other sheer fabric for a smoother look.

Mending Sheets

Use old white socks to mend corners of fitted sheets. The knitted fabric will have more give to stretch over the mattress.

Short Blankets

If a blanket is too short for a bed, sow a wide strip of unbleached muslin along one end. This can be tucked under the ,mattress to hold the blanket in place.

Fitted Mattress Pad

If a fitted sheet wears out in the middle, but the sides and ends are in good shape, sew a mattress pad over the middle. The sheet will keep it smoothly in place.

MENU

Search This Blog